|
|
|
|
Product ID: PR-NP
Tubular Photo Sensor
|


|
Specifications:
- Detection range: 2M (S46 mirror) / 4M (S51 mirror).
- Supply voltage: DC10 - 30 + -20%, ripple (P--P): 10% max.
- Current consumption: 30mA max.
- Max output current: 100mA max.
- Response time; switching frequency: Less than 3.0mS (on + off); 333Hz.
- Circuit protection
- Output over current protection.
- Reverse-polarity protected.
- Interference suppression.
- Output mode: NPN or PNP.
- Operation mode: Light-on, dark-on selectable by control cable (white).
- Ling-on operation (for NPN only): Control cable (white wire) connected to V+ (brown).
- Dark-on operation (for NPN only): Control cable (white wire) connected to 0V (blue).
- Indicator: Yellow LED on, when light is received.
- Ambient temperature: Operating temperature: -25¢XC ~ 55¢XC.
- Protection degree: IP 66.
- Extraneous light luminosity
- Lamplight: 3,000 Lux.
- Sunlight: 10,000 Lux max.
- Adjustable sensitivity: Yes - by potentiometer.
- Cable
- Length: 2m.
- Material: PVC.
- Color: Gray.
- Housing material: Plastic housing
- Housing and nut: ABS resin.
- Color: Green.
- Lens: PMMA.
- Weight
- A: 89g.
- B: 69g.
- C: 21g.
- M46: 11g.
- M51: 20g.
- Housing material: Metal housing
- Housing and nut: Brass, NI plated.
- Lens: PMMA.
- Weight
- A: 116g.
- B: 96g.
- C: 48g.
- M46: 11g.
- M51: 20g.
|
Ordering information:
- Minimum Order: Negotiable
- TEL: 886-02-89836022
- FAX: 886-02-89836782
|
|
Copyright (C) Sunwu Technology Co., Ltd.. All rights reserved.
Commerce Site
.
|
|
| |